DAQFactory Express:
For those that have simple data acquisition and control needs and do not want to spend a lot of money on software or do their own programming, we offer DAQFactory Express. DAQFactory Express offers data logging, user designable screens with trending, automation capabilities and more. DAQFactory Express is only available with the purchase of either the LabJack U12, UE9 ,  U3, and the new U6 and is included with the purchase.

With DAQFactory Express you get:

• Flexible Data Acquisition, read different inputs at different intervals
• Continuous or conditional data logging. Log to binary or ASCII files.
• Automation. Create batches or add software process control to run your overall system.   Two user definable screens you can create on the fly using any combination of 10 different screen components. No wiring!
• Powerful data visualization. Create publish quality graphs.
• This and more in one easy to use, flexible package.

More Information on DAQFactory Express

Accessories

CB15 Terminal Block

Compatibility: U6 / UE9 / U3

Provides convenient screw terminals for the DB15 connector on the LabJack U6, U3 and UE9. The CB15 can connect directly to the LabJack or can be attached with various types of cables (not included). Not compatible with the U12. Includes screwdriver. 

Download the CB15 datasheet

 
CB37 Terminal Block

Compatibility: U6 / EU9

Provides convenient screw terminals for the DB37 connector on the LabJack U6. The CB37 can connect directly to the UE9 or can be attached with various types of cables (not included). For the LabJack UE9 only. Includes screwdriver. 

Download the CB37 datasheet

EB37 Experiment Board

Compatibility: U6 / UE9

The EB37 experiment board connects to the LabJack UE6’s DB37 connector and provides convenient screw terminal access. Also provided is a solderless breadboard and useful power supplies (+/-10 volts, 3.3 volts, and 1.25 volts). Includes a screwdriver, power supply, and jumper wires. For the LabJack UE9 only. 

Download the EB37 datasheet

RB12 Relay Board

Compatibility: U6 / UE9 / U3

The RB12 provides a convenient interface for the U6/U3/UE9 to industry standard digital I/O modules, allowing electricians, engineers, and other qualified individuals, to interface a LabJack with high voltages/currents. The RB12 relay board connects to the DB15 connector on the LabJack U3 or UE9, using the 12 EIO/CIO lines to control up to 12 I/O modules. Output or input types of digital I/O modules can be used. The RB12 is designed to accept G4 series digital I/O modules from Opto22, and compatible modules from other manufacturers such as the G5 series from Grayhill. No modules are included. Opto22 modules are available from opto22.com, alliedelec.com, and newark.com. Grayhill modules are available from digikey.com. The RB12 does not require a cable or power supply, and does not ship with a cable or power supply. Not compatible with the U12. Includes screwdriver.

EI-1040 Dual Instrumentation Amplifier

Compatibility: U12 / UE9 / U3

Dual instrumentation amplifier provides 2 high-impedance differential inputs. Operates from a single 5 volt supply and provides a +/- 15 volt supply and a 4.096 volt reference. Analog input range is +/- 10 volts. The gain of each channel is set to 1, 10, 100, or 1000 via digital I/O or jumper wires. Typical current requirement is about 80 mA @ 5 volts, allowing the EI-1040 to be powered from a +5V terminal on a LabJack.

Download the EI-1040 PDF datasheet

LJTick-CurrentShunt(LJTCS):

Compatibility: U6 / U12 / UE9 / U3

-- NOT YET AVAILABLE. The LJTick-CurrentShunt (LJTCS) is a signal-conditioning module designed to convert a 4-20 mA input signal into a 0.47-2.36 volt signal compatible with the LabJack U3 or UE9.

LJTick-Divider(LJTD):

Compatibility: U6 / UE9 / U3

The LJTick-Divider (LJTD) is a signal-conditioning module designed to divide 2 single-ended channels of 0-10 volt analog signals down to 0-2.5 volt signals. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on newer LabJacks such as the U3 and UE9. The use of large resistors and a precision op-amp buffer provide an input impedance of 1 MW. By adding or replacing resistors, many other configurations are possible, such as a level shifter that converts ±10 volts to 0-2.5 volts.

LJTick-InAmp(LJIA):

Compatibility: U6 / UE9 / U3

Signal-conditioning module provides two instrumentation amplifiers ideal for low-level signals such as bridge circuits (e.g. strain gauges) and thermocouples. The LJTIA has switches to choose from 5 gain settings (x1, x11, x51, x201, or custom) and two output voltage offsets. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on newer LabJacks such as the U3 and UE9. (RoHS=YES)

LJTick-Proto(LJTP):

Compatibility: U6 / UE9 / U3

The LJTick-Proto (LJTP) consists of an 8x8 grid of holes for prototyping custom signal-conditioning ticks for the LabJack U3 or UE9.

LJTick-RelayDriver(LJTRD):

Compatibility: U6 / UE9 / U3

The LJTick-RelayDriver (LJTRD) allows 2 digital I/O lines on a U3 or UE9 to control a relay or other moderate load up to 50V/200mA.

LJTick-DAC(LJDAC):

Compatibility: U6 / UE9 / U3

Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block, and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with any UD family device (U3/UE9), except for U3 hardware revision 1.20 (U3A).

Sensors

EI1022 Temperature Probe

Compatibility: U12 / UE9 / U3

Easy to use and inexpensive temperature probe. Designed to work with a LabJack, but can also be used with any voltage measuring device. Outputs 10 mV per degree C, and has a range of -40 to +100 degrees C.

Download the EI-1022 PDF datasheet

EI1050 Digital Temperature/Humidity Probe

Compatibility: U12 / UE9 / U3

The EI-1050 uses two digital lines on the LabJack U12 (IO0 and IO1) to retrieve temperature and relative humidity measurements. Featuring the Sensirion SHT11 sensor it provides 14-bit temperature readings and 12-bit humidity readings. An enable line is provided allowing up to 20 EI-1050 probes to be connected to a single LabJack U12. Measurement range is -40 to 120 degrees C for temperature and 0 to 100% for humidity. Accuracy is +/-0.5 degrees C (@ 25 deg C) and +/-3.5%. With LabJack U12 firmware version 1.10 or higher (Feb 2003 or later), it takes about 230/75 milliseconds to get a temperature/humidity reading. With earlier firmware versions it takes about 2 seconds to get one temperature or humidity reading.

Download the EI-1050 PDF datasheet

EI1034 Temperature Probe

Compatibility: U12 / UE9 / U3

Easy to use, very accurate, and waterproof temperature probe features a high-level linear output of 10 mV per degree F and a typical accuracy of +/-1 degree F.