|
|
5B
Signal Conditioning Modules |
|
These modular
signal conditioners are ideal for applications involving monitoring and control of
temperature, pressure, flow, and other analog signals. Combined with one of our supported data acquisition boards, 5B Series conditioners provide a
solution to your signal conditioning problems. Designed for industrial applications, these modules incorporate an
innovative circuit design using transformer-based isolation.
Combining 1500V rms continuous
common mode voltage isolation, ±0.05% accuracy, small size and low cost, the 5B Series is
an attractive alternative to expensive signal conditioners and in-house designs . |
|
|
Rugged, Uniform Package
All modules are identical in pinout and size (2.25 x 2.25 x 0.60 inches), and are
hard-potted to protect the internal circuitry from moisture and other contaminants.
High Performance
All modules feature ±0.05% calibrated accuracy and ±0.02% non-linearity.
Chopper-based amplification assures a low drift of ±1µV/°C and excellent long term
stability.
Flexibility
The 5B Series can be easily tailored to the needs of many applications. These plug-in
signal conditioners can be mixed and matched in any combination to adapt to even the most
demanding applications. Each module features a simple pin-out, plugs easily into
instrument-mounted sockets, and is secured with a self-contained mounting screw.
Easy To Use
The 5B Series has no pots to adjust. Simply choose the module, function, and
measurement range, then install it in the instrument. Now connect your input signals. The
instrument becomes a direct sensor interface, outputting a perfectly conditioned, ±5V
signal.
On-Board CJ Compensation
Each input connector of the 5B Series backplane is complemented by a cold junction
compensation circuit, allowing the thermocouple modules to be located in any position.
|
|
|