High Definition (HD) Frame Grabber

Nexeon HD is a full-featured video frame grabber for high-definition video display and capture. It supports video inputs from standard and HDTV resolutions as well as VGA display. Nexeon HD has a flexible input interface complete with an HDMI compatible receiver and supports both analog and digital DVI/HDMI standards.

Features

• PCI Express Interface
• Real-Time Bus-Mastering Video Transfer
• On-board TI DM642 DSP for Robust Performance
• Supports Standard and High Definition Inputs
• RGB/YPrPb, S-Video, or Composite Video Inputs
• HDTV Display and Capture up to 1080i
• VGA Display and Capture
• DVI or HDMI Input Support
• General-Purpose I/O Triggers
• Windows 2000 and XP Support
• Free dPiction Capture Application
  

Download Spec Sheet

dPiction Software
  

• PCI Express form factor
• PCI Express x1 slot

Video Inputs

• Standard or high-definition
• YPrPb/RGB component, S-Video, and three composite inputs
• DVI or HDMI input support

HD Video Acquisition

• Up to 150 MHz acquisition rate
• Progressive scan input support
• HDTV standard support up to 1080i
• VGA display resolution support up to 1280x1024 @75Hz

SD Video Acquisition

• NTSC (J,M, 4.43) PAL (B,D,G,H,I,M,N,Nc,60) and SECAM (B,D,G,K,K1,L) support
• High-quality 10-bit digitization
• Square-pixel and CCIR-601 resolution support

• Smooth interpolated scaling to randomly sized windows
• Simultaneous video transfers to system or display memory
• 64 MB on-board frame buffer
• Area of interest transfers to system memory
• Configurable LUT
• RGB 32/24/16/15/8 and YUV 4:2:2 pixel formats
• Extensive interrupt control for robust capture

I/O Triggers

• 4 general-purpose I/O triggers
• Programmable between input and output triggers
• Automatic display mode and sync detection
• +12V DC power output

Physical and Environmental

• 5.00" (length) x 4.20" (height)
• DVI-I display connector
• DB-15 I/O connector

Available SDK

• Compatible with dVeloper SDK
• Windows 2000 and XP support